updates already installed v1.8-v3.2 to v3.4
Version 3.4 of Future Drive Accelerator
which is running out of date in middle of November 2002,
to give pirates no chance,
New features figured out:
* 'FDA' give you also more CPU-time, because it's just about 15 times faster,
than the scsi.device (IDE-Controller).
* UAE-JIT2 and SCSI-drives are faster with it.
* 'FDA' is 5 times cheaper and 4 times faster than 'PFS' with 'FFS' and all
well tested disk-repair/reorg-tools with full compatibility to all existing
programs, it's faster to install, and updates are free.
* 'FDA' is so fast, that with "Protect cache with checksums" it's faster than
a "naked" Amiga. And the data in memory (cache), are safer than in any other
program (excepting Enforcer/MuForce). I.e. A texteditor holds the text in
memory less safe, than 'FDA'. 'FDA' is protected like, MungWall or
MuGuardianAngel which detect illegal freememory access, but it doesn't need
an MMU. By this, it detect damaged memorychips also. Damaged cache will be
recovered from disk. And damaged write-cache will be not written back to disk.
english documentation:
o `fda_DviPS.lha` DVI (TeX) and PostScript (GhostScript) formarts,
o `fda.lha` AmigaGuide and HTML formats.
german documentation:
o `fda_d_DviPS.lha` DVI (TeX) and PostScript (GhostScript) formarts,
o `fda_d_GuidHTML.lha` AmigaGuide and HTML formats.
FAQ:
* Please, enable "Protect cache with checksums" in preferences, first time
you run 'FDA', to figure out whether you have installed programs which
change foreign memory blocks (cache). If so, you should remove the "bad"
programs. When there is no further "FDA Checksumme-error" request, your
system is clean and stable and you should disable "Protect cache with
checksums" to get maximum performance.
Perhaps, the next version protect the cache with MMU for (relativ)
"safety"; without slow down the performance.
* It is *very recommend* to install 'StackAttack' (also for OS3.5) after
SetPatch and before FDA in the 'S:Startup-Sequence', it make FDA and
the whole Amiga more stable (fixes deadlocks, Guru $8000004 & $1000005)
c:StackAttack ADDSTACK=512 ;Increase StackSize of every Programm
* Please, don't install QuietTD from DiskSpare, i don't know why it
hangs.
Q: I have a Blizzard board, and the mulitasking doesn't sweep.
A: Reuse the Chip-memory as cache; because only Fast-memory access confuse
these boards.
Q: I changed some files and after the reboot, the files are unmodified.
A: Install DiskSafe. See manual-Requirements.
Q: The internet-software crashes very often, and my new emails are not saved.
A: I use "Async-delay" = 2 sec, for my partitions where i write while i'm
online, it's good for 28k modems. When you have a faster, you should set
it to 1 sec, to save the datas back to disk, while you are online. And
not after a logout without Guru. If the datas aren't written back,
because the write-traffic of your partition is to high (several writes
while 1 sec); use "write sync".
Q: Why FDA doesn't wait silently for mounting CD0: and then simply cache it?
The same is for PC0:, if FDA is started BEFORE PC0: mounts itself
from Devs/DosDrivers, FDA just complains that "Can't Find PC0:"
and doesn't care if PC0: is started later...
A: AmigaOS doesn't have a "simple" mount-notify function, but a hint:
Insert in "S:Startup-Sequence" behind SetPatch,
SaferPatches/PatchControl/SetMan/PatchLib's PatchSetFunc,
StackAttack, PoolMem and FBlit<V3.64:
RUN <>NIL: Sys:System/FDA ENVARC:FDA-Boot.prefs QUIET
and at bottom of "S:User-Startup":
Sys:Prefs/FDAPref ENVARC:FDA-AfterBoot.prefs USE
and save as with FDAPref the two new prefs.
Q: I have 16 partitions, how can i enable it quickly?
A: It's not 'HyperCache', it was difficult enough to detect partitions.
Use SHIFT-KEY & LEFT-MOUSE.
Q: I use the FAT95 (MSWindows95) FileSystem for ZIP drive. The "Size of Track"
is not saved.
A: Enter the Surfaces, BlocksPerTrack, LowCyl and HighCyl values in
devs:DOSDrivers/devs:mountlist.
Q: I use the FAT95 (MSWindows95) FileSystem for ZIP drive. While inserting a
disk an Alert #0FDA0016 and Enforcer-hits popup.
A: Enter the Surfaces, BlocksPerTrack, LowCyl and HighCyl values in
devs:DOSDrivers/devs:mountlist.
Q: I have 16MB RAM, and ADPro use the whole free memory.
A: ADPro:ADPro MAXMEM=5000000 FASTMEMONLY
Q: Since I installed OS v3.5 it's so slow.
A: SetPatch install NSD 4GB support for:
timer- input- keyboard- gameport- console- clipboard- trackdisk-
ramdrive- and statram-device. They will call several times per second,
and it's nonsense to run code for a architekture we will never credit
(64-Bit CPU to access more than 4GB memory).
Comment them in devs:NSDPatch.cfg out.
Q: The cache doesn't work with all my drives connected to cybscsi.device.
A: SetPatch doesn't check wheter devices already support NSD, and patch it
still. And the patch doesn't work with WaitIO().
Comment cybscsi.device in devs:NSDPatch.cfg out, or SetPatch NONSD.
Q: How to shutdown UAE safely to write the cache back to disk?
A: Use keys LeftShift+RightShift+Tab instead of reset after you installed:
DiskSafe REBOOT WAITVERIFY VERIFYREQ RESETKEY RESETSEQ=LShift+RShift+Tab DF0: DH0: DH1: DH2:
and quit UAE (UAE-JIT2 quits after reboot).
Tip: It's not recommended to have mounted AFFS Harddiskfiles while UAE is running on Linux.
Write some shell scripts and save it i.e. at /amiga
mount.sh:
#! /bin/sh
mount -t affs /data/Amiga/uae/HDF/sys.hdf /amiga/SYS -o auto,user,exec,verbose,loop
umount.sh:
#! /bin/sh
umount /amiga/SYS
It`s recommended to install an CopyMemQuick replacement (see Chapter Speedup).
Choose your processor type:
68000 Aminet:util/boot/COPMQR28.lha
68020 Aminet:util/boot/CMQ030.lha
68040+ Aminet:util/boot/NewCMQ060.lha
History V3.4 31-Sep-2001
* Nothing to mention.
History V3.2 02-Nov-2000
* Fixed: Various Alerts #4 #6 of any program which call AllocMem().
This was since v3.0, or perhaps with OS2.0 and OS3.0 if FDA
doesn't print during startup "Can't remove Dos-Patch of AllocMem"
It uses now the the MEMF_NO_EXPUNGE flag for AllocMem, like it does
previous, if FDA print "Can't remove Dos-Patch of AllocMem".
This means ramlib (flush libraries).
FDA work again with PoolMem, if PoolMem is before installed.
I have no manuals wheter MEMF_NO_EXPUNGE also work in OS2.0.
* Fixed: FlushLibs-Call decrease cache.
* Fixed: "Can`t create Update-Task"
* Check the mask wheter the controller work with whole memory.
* Cache usage via Power-LED if "View color flash if track moved
or deleted" is enabled.
* Debug versions in fda.lha for memory and disk.
FAQ addition: Setpatch OS35 or NSDPatch and cybscsi.device.
History V3.0 20-Oct-2000
* Known bug fixed: Cache flushed sometimes, because private memorylist
with Allocate() failed. ViNCEd (VNC:) is known to do
it, some others too.
The Cache is now bigger and therefore faster.
Especially while booting.
* Better finding the appropriate AllocMem() to skip ramlib
(flush libraries), to decrease cache if the memory is really full.
* Emulate undocumentated memoryfunctions features.
* Call in OS3+ AllocPooled(). Faster with lot of memory, and
fragmentates it less. CPU cache optimized. Faster cache initialization
and startup.
* Optimized: Allocate/AllocMem/AllocAbs/AvailMem.
* Fixed: If "Protect cache with checksums" is enabled, and a program
damage the cache, FDA determines itself, alerts and deadlocks the OS.
* Perhaps work now for MorphOS (untested, results are welcome).
FAQ addition: For ADPro and Setpatch OS35 or NSDPatch slow down.
History V2.8 06-Oct-2000
* Fixed: Preferences failed to run, because statram.device patched with
Setpatch OS35 or NSDPatch failed to open.
* Open device with flags from Devs:DosDrivers. Very few program do it.
* Faster: Doesn't open devices while Pref initialization.
* Fixed: USE SAVE Argument writes corrupt preferences, if no GUI opens.
* More error-reports for startup-failures.
* Can now be started with project-icon from Sys:WBStartUp.
FAQ addition: For FAT95 with ZIP-drives.
History V2.6 06-Jul-2000
* Found the taskpriorities of PowerFlyer device;
for an faster access in 'n sweep.
* Fixed: QUIET prints still the first line.
FAQ addition: For Blizzard boards.
History V2.4 14-Apr-2000
* Found the taskpriorities of ExpSys.device & buddha_atapi.device;
for an faster access in 'n sweep.
* Demo uses whole free memory to speedup.
History V2.2 16-Feb-2000
* Fixed, the preferences calculate sometimes unreal values of
'Size of Track'.
* Checksumme calculation faster.
* Fixed, can't create the update-task for IDEfix ATA[PI]
(CD-drive & ZIP-drive).
* Fixed, unclean termination and preferences-use if 'PatchControl'
is installed.
* Fixed, trackdisk capacity-change detection.
* Fixed, hanging of messydisk.device v1.56.
* Perhaps fixed, hanging of cd.device 3.6 (05.03.97) Georg Campana;
because untested.
* Fixed, "Verify error" while writing ½ trax.
* Fixed, "write async" timer restarted while receiving update-command
according read-command.
New USA office address:
ShareIt! Inc
Suite 1800
Chapel Hill Professional Center
GREENSBURG PA 15601-8019
USA
Phone: 724-853-6618
Fax : 724-850-8187
Of course our old address with the PO Box is still available and can be used
to send us checks and other mail. In future, you are welcome to use our new
address instead.
History V2.0 17-Dec-1999
* Fixed, hanging of mfm.device (CrossDos) v40.9 and fd.device
(XFileSystem v2.14 ) v42.86; because they use SendIO() without
WaitIO(). This was also the case for the hanging bug of
FDAPref.
* Fixed, capacity-change detection for XFileSystem v2.17
* trackdisk.device OS 3.0 doesn't work with ½ trax and format-command,
and doesn't reply a error value. The update-task uses now the
write-command.
FAQ addition:
* Please, don't install QuietTD from DiskSpare, i don't know why it
hangs.
* Please, don't use fd.device v42.86 from XFileSystem v2.14 together
with "verify", use instead mfm.device it works. XFileSystem v2.16 do
something but not bugfree.
Copyright addition:
Registration move to new user is free of charge.
History V1.8 09-Nov-1999
* Fixed, "write-Async" not 100% working timer.
* Added, PFS against FDA+FFS benchmark.
History V1.6 30-Sep-1999
* Recognize capacity-change of removeable-medias.
I.e. DD<->HD Disks
* English translation of documentation
Thanks to The Amiga Translators Organization [http://ato.vapor.com]
Jens Neubauer <jens.neubauer@gmx.de> for translate.
Heiko Hayn <Smeagel@gmx.net> for proof-read.
* ESC-Key supported
Other products
**************
Aminet:gfx/edit/FCP.lha (Convert Pic -> CopperList (6BitPlane -> 0 BitPlane CopperList) - CopperListEditor - CopperListSearcher - Full Modula-2 SourceCode)
Aminet:mods/slow/BrainBird.lha (Shaman drums to meditate and 14 Ambient NewAge Songs)
Aminet:comm/misc/TelekomBill.lha (German Phone-Bill calculater for WG´s)
Aminet:gfx/show/ActiveWinPic.lha (Picture on any window, special SHELL!)
Aminet:util/boot/IsInserted.lha (StartUp-Check if a Disk inserted then start BootUte)
Aminet:misc/unix/File2Partition.lha (Spare memory if LinUX install, stores files direct to HD, Disks or any LogicalDevice)
Aminet:dev/asm/ExecDis.lha (A commented disassembly of the exec library 1.2)
http://computer.freepages.de/tauchmann/PasTeX-SuperHighRes.lha (5.1MB)
(SuperHighRes & Epson medium pk-fonts, other resolutions possible)
(=> Display 9PinPrinter `Quality` on Screen)
Optimized Oberon 2 Ansi-C preCompiler (Translate Oberon-2 Source Code to optimized ANSI-C (GCC) sourcecode. =>Oberon for PowerPC m68k... prozessors, requires GNU/Linux/Unix/AmigaOS)
(Oberon-2 is nearly identical to ADA 95, Amiga E, Cluster, Pascal and Modula.)
Garbage Collector (Replaces C malloc and C++ new;C string (cord) package that provides for fast concatenation and substring operations on long strings;Required by Optimized Oberon 2 C preCompiler,
Sather and Java.)
extended ixemul.library (changelog: CPU&OS independent, VNC:, cross-compile, Library IDString, flock(), Optimized &c. Required by Optimized Oberon 2 C preCompiler, Java and many others.)
Aminet:dev/gcc/crossgcc_linux.tgz (5.3MB) (GNU C, C++ & Oberon cross-compiler for Linux which build m68k-binaries)
http://home.pages.de/~MartinTauchmann/devel.html#Oberon
http://home.pages.de/~MartinTauchmann/files/
|
aminet net>