Short: Ami-CPC tools Author: Ludovic DePlanque, Morphos port by Fabrizio "Lanch" Bartoloni Uploader: lanch tiscali it (Fabrizio Bartoloni) Type: misc/emu Version: 0.46 Architecture: ppc-morphos Note from porting author: Sorry I didn't manage to compile DZ80.C, luckily there are way too many other Z80 disassemblers out there on Aminet. AMI-CPC is given with some tools : - Cpc2Cpe : Allows to convert an old diskette file from AMI-CPC (.CPC) to a diskette file usable with CPE . It's a CLI command. An ASL requester allows to select the .CPC source file, the file created's name is always : drivea.dat. - Cpc2dsk : Allows to convert an old diskette file from AMI-CPC (.CPC) to a diskette file in the .DSK format. It's a CLI command. An ASL requester allows to select the .CPC source file, the file created's name is the same that the original .CPC file, with it's extension changed to .DSK. - Cpc2Emucpc : Allows to convert an old diskette file from AMI-CPC (.CPC) to a diskette file usable with EmuCPC . It's a CLI command. An ASL requester allows to select the .CPC source file, the file created's name is the same that the original .CPC file, with it's extension changed to .EMUCPC. - CreeDisk : Create an empty diskette in the .DSK format. It's a CLI command. WARNING : the diskette created's name is always DISC.DSK, and if a file of this name exists, it will be erased by using this command. - DZ80 : Allow to dissassemble a Z80 binary file. It's a CLI command. It's need two arguments : - the name of the source file, - the start adress for dissassembling. This adress can be type in decimal, or in hexadecimal, if typing the '$' character. Some options allows to put blank lines after some Z80 instructions. To obtain the list of theses options, just type under the CLI : "DZ80", without any arguments. The dissassembling output is sent on the OutPut() of the dos.library. So you may redirect the output in a file. Example of utilisation : "DZ80 Sapiens.bin $300 >sapiens.asm"