Short: 1024x768 and/or HAM Workbench with AGA! Author: per-espen.hagen@ffi.no Uploader: per-espen hagen ffi no Type: driver/moni Architecture: m68k-amigaos After I said on Usenet that I had used a HAM6 1024x768 Workbench, several people have asked me how I managed to get that kind of resolution with AGA. As many people don't seem to know that this is indeed possible, I thought I'd upload this little archive to Aminet... Contents: ========= 1024x768 This directory contains a Euro36 monitor driver with modified tooltypes (for 1024x768, 53 Hz in Super-High Res Laced). WARNING: Don't even TRY this if you don't have a real multisync monitor! I can GUARANTEE that a 1940/42 won't do, as the horizontal frequency is 21.2 kHz. It works very well on my IDEK MultiFlat, though. To try it, just doubleclick "1024x768" (or, if you don't trust other people's scripts, (1) doubleclick Euro36 and (2) copy overscan.prefs and screenmode.prefs to ENV:Sys/). Note: This will NOT work properly if you already have a Euro36 mode enabled; in that case, move your old Euro36 file across from Devs/Monitors to Storage/Monitors and reboot, then run the 1024x768 script. You should now be able to see a 1024x768, 32-colour Workbench screen... which unfortunately flickers almost as bad as PAL Laced. :-( Use your Prefs/ScreenMode program to change screen depth. The overscan.prefs file has been manually edited to allow full-screen cursor movement. This will be destroyed if you edit the overscan with Prefs/Overscan. If you don't want to take care of your eyes :-) , you can modify this setup even further. My IDEK just manages to hold a 1280x1024 display, at 34 Hz interlaced. But I can't stand watching it for many minutes at a time... HAM6 Ever wanted icons with thousands of colours? If so, this might be for you. It's a small hack that makes the Workbench open in HAM6 mode. I've included prefs files for PAL, DblPAL, and Super72 screens. Just doubleclick either of them and see... I've included some icons of various sizes as a small taste of what you can get. The good thing about HAM icons is that they can be made almost completely independent of your WB colours (the included icons assume colour 0, 1, and 2 to be grayish, black, and white, respectively. No other palette colours are used.) The icons were created with ImageFX, btw. To make a similar mode yourself, just edit your ENV:Sys/screenmode.prefs file with a binary editor such as AZap. At offset $32, you'll find the Display ID for the current mode (e.g. 0008 9024 for Super72:Super-High Res Laced). Set the HAM bit by changing the sixth digit from zero to 8 (i.e., 0008 9824 for the Super72 example). You may also need to change the depth to 6 (for normal HAM) or 8 (for HAM8); this should be at offset $3B. The logical combination would be a 1024x768 HAM6 Workbench -- but I guess you've got the general idea now, so you can do that yourself. :-) Have fun, Per Espen Hagen